Finden Sie Rollformmaschine, Dachrolle, Die Maschine Bildet auf Industry Directory, zuverlässige Hersteller / Lieferant / Fabrik aus China
| Lieferzeit: | 25 Tage |
|---|
Modell: jcx cold roll forming machine
| 1 | Type and specification | JCX32-250-1000 |
| 2 | Thickness | 0,15-0,8mm |
| 3 | Width of plate | 1220mm |
| 4 | Productitity | 10/15m/min |
| 5 | Rollers | 18 rollers |
| 6 | Frame | 200H steel |
| 7 | Diameter of roller | 70mm |
| 8 | Dimensions | 8500x1500x1500mm |
| 9 | Effective | 1000mm |
| 10 | Power | 11kw+5,5kw |
| 11 | Voltage | 380v 50 hz 3 phase |
| 12 | Equipment of parts | roll forming system,hydraulic system ,PLC contral system ,counter,cutting ,feeding load,received table . |
| Delivery | within 30 days after getthing deposit; |
| Package | Exporte Standard package for container |
| Payment | TT(30% by TT in advance ,balance by TT after inspect the machine before delivery ) |
NO |
Name |
Unit |
Qty |
1 |
Manual decoiler |
set |
1 |
2 |
Main machine for roll forming |
set |
1 |
3 |
PLC Control system |
set |
1 |
4 |
Hydraulic system |
set |
1 |
5 |
Post cut |
set |
1 |
6 |
Stackinig |
set |
1 |
No |
|
Technical Specification |
1 |
Manual Uncoiler |
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:5T,Inner diameter: 500-508mm |
2 |
Feeding Table |
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. |
3 |
Hydraulic System AND Computer Control Cabinet |
Power:4kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:EURA |
4 |
Material of blades |
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,Quenching treatment |
5 |
Output Table
|
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products. |
Produktgruppe : Andere Formmaschine
